2. Inserting the elevator unit
Required parts:
- lower fuselage bit
- upper fuselage bit (rudder bracket)
- elevator unit
- 2x
Screws
(16x2mm)
Insert the lower fuselage bit in the fuselage, please pay attention to the matching vault. The two ends of the fuselage
bit must point above, out of the fuselage.
Put on the rudder mounting to the vertical tail.
Fix the elevator unit with 2 screws. (16x2mm)
Insert the upper fuselage bit
through the elevator unit in the lower fuselage bit.
Fix the elevator unit with 2 screws (16x2mm).
3. Assembling the vertical tail
Required parts:
- Vertical tail
- 2x Screws (20x2mm)
Insert the vertical tail in the provided notch (upper fuselage
bit). Fix the vertical tail with the screws (20x2mm).
