Technical Data:
Span:
2000mm
Body:
1044mm
Weight without battery and receiver:
1050g
ESC / Motor controller:
30A Brushless
Motor:
1400kV Brushless Motor
Servos:
6x 9g
Recommended battery:
11.1V (3S) 1800 - 4500 mAh LiPo (not included)
Assembling the model
Please make sure that you are using the right screws (consider the length). See the instructions on the first page.
For the setup you need- next to the included screw driver- a pair of pliers.
1. Servo linkage assembling for main wings / elevator and rudder
Required parts:
- Left and Right wing
- Elevator and rudder
- 6x servo linkages incl. clevis
- 6x Rudderhorn and counterpart
- 12x screws (13x2mm)
Slide the servo linkages in the matching holes of the servo horns.
Mount the rudder horns and the counterplate with 2 screws (15x2mm) in the recesses on the underside of the wings.
Connect the clevis with the aileron.
