13
Diplo User Manual
(Optional) Press the number
of
seconds
to change the
curing time. A dialog window
prompts which requests you
to set your curing time. After
you have chosen a time, press
the checkbox symbol ( ) to
confirm.
Ackuretta recommends choosing a curing time of at least 5 times the curing time of the resin at 0.100 mm per
layer. For most resins, 10 seconds is enough time.
Note:
Press one of the three
buttons to begin cleaning
the appropriate side or sides:
Clean Both Sides
,
Clean
Left
, or
Clean Right
. In the
confirmation screen, press
Clean
to confirm.
The machine will begin curing one layer off the bottom of the vat. You do not need to perform
any action until the
Cleaning Complete
screen appears.
