Turn on the power switch to start your printer.
After starting and possibly updating your
printer, select a print and begin printing. See
Print, page 8
.
When a print begins, you are unable to use the console for any other tasks, and the door will be locked. Check
your settings, clean your vat, and do any other necessary operations before starting your print.
Note:
When you start the Diplo, the
tab is open by default. In this tab, you can select and start your
prints.
Before You Begin:
•
Make your print files in your software. See
Software and Print File Types on Page 5
.
•
Clean your vat and build platform.
•
Fill your vat with at least 2 mm of resin.
•
Attach your vat by pushing it as far back as possible along the vat guideway.
•
Attach your build platform by pushing it back along the build platform guideway.
•
If your print is not in the printer memory, attach your USB device to the printer.
For detailed instructions about preparing your printer, see
Setting Up Your Printer on Page 6
.
Diplo User Manual
08
