When the print completes, the printer may make an alert sound depending on your settings.
Remove your print and perform post-processing. Press
Return to Menu
to start another print or
perform other console tasks.
Clean
Whenever your print fails, use the
Clean
function to remove pieces of prints that did not stick to the
build platform during printing. The
Clean
function cures one layer of resin at the bottom of the vat,
and then you can easily remove that cured layer and throw away any lingering debris with it.
•
Small pieces of paper — note cards, sticky notes, or business cards work well
•
At least 0.5 mm of resin across the vat
•
Tissues
What You Need:
Do not
use any metal tools in the vat because metal tools may damage the vat surface. This includes knives,
scrapers, and tweezers.
Warning:
Press the
Clean
tab on the
top of your Diplo console.
Diplo User Manual
12
