![background image](http://html1.mh-extra.com/html/acer/power-2100/power-2100_user-manual_3952707090.webp)
AcerPower 2100 (V66LT/IDB3-C) User’s Guide
90
4.1.1
ESD Precautions
Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components.
Always observe the following precautions before you install a system component.
1.
Do not remove a component from its protective packaging until you are ready to install it.
2.
Wear a wrist grounding strap and attach it to a metal part of the system unit before handling components. If a
wrist strap is not available, maintain contact with the system unit throughout any procedure requiring ESD
protection.
The heatsink becomes very hot when the
system is on. Do not touch the heatsink with
any metal or with your hands until the
system has cooled down.
4.1.2
Pre-installation Instructions
Always observe the following before you install a system component:
1.
Turn off the system power and all the peripherals connected to the unit before opening it.
Make sure that the system is unplugged.
2.
Open the system according to the instructions in the “Removing and Replacing the Housing Cover” section.
3.
Follow the ESD precautions in section 4.1.1 before handling a system component.
4.
Remove any expansion boards or peripherals that block access to components.
5.
See the following sections for specific instructions on the component you wish to install.