![background image](http://html1.mh-extra.com/html/acer/power-2100/power-2100_user-manual_3952707064.webp)
AcerPower 2100 (V66LT/IDB3-C) User’s Guide
64
Sectors
This parameter specifies your hard disk’s number of sectors, and is automatically set depending on your Type
parameter setting.
Size
This parameter specifies the size of your hard disk, in MB.
Hard Disk Size > 504 MB
When set to Auto, the BIOS utility automatically detects if the installed hard disk supports the function. If
supported, it allows you to use a hard disk with a capacity of more than 504 MB. This is made possible through
the Logical Block Address (LBA) mode translation. However, this enhanced IDE feature works only under a DOS
or Windows 3.x/95/98 environment. Other operating systems require this parameter to be set to Disabled.
Hard Disk Block Mode
This function enhances disk performance depending on the hard disk in use. If you set this parameter to Auto, the
BIOS utility automatically detects if the installed hard disk drive supports the Block Mode function. If supported,
it allows data transfer in block (multiple sectors) at a rate of 256 bytes per cycle. To disregard the feature, change
the setting to Disabled
.
This parameter appears only when you are in the Advanced Level.
Advanced PIO Mode
When set to Auto, the BIOS utility automatically detects if the installed hard disk supports this function. If
supported, it allows for faster data recovery and read/write timing that reduces hard disk activity time. This results
in better hard disk performance. To disregard the feature, change the setting to Disabled
.