![background image](http://html1.mh-extra.com/html/acer/power-2100/power-2100_user-manual_3952707053.webp)
Index
53
Chapter 3
BIOS Utility
Most systems are already configured by the manufacturer or the dealer. There is no need to run Setup when
starting the computer unless you get a Run Setup message.
The Setup program loads configuration values into the battery-backed nonvolatile memory called CMOS RAM.
This memory area is not part of the system RAM.
If you repeatedly receive Run Setup messages,
the battery may be bad. In this case, the system
cannot retain configuration values in CMOS. Ask
a qualified technician for assistance.
Before you run Setup, make sure that you have saved all open files. The system reboots immediately after you exit
Setup.
3.1
Entering Setup
To enter Setup, press the key combination
.
You must press
simultaneously
while the system is booting. This key combination
does not work any other time.