Acer PD-115 Скачать руководство пользователя страница 4

Страница: 4 / 58

Preface

Before using this information and the product it supports, please read the following

general information.

1. This Service Guide provides you with all technical information relating to the BASIC

CONFIGURATION decided for Acer’s “global” product offering. To better fit local

market requirements and enhance product competitiveness, your regional office MAY

have decided to extend the functionality of a machine (e.g. add-on card, modem, or

extra memory capability). These LOCALIZED FEATURES will NOT be covered

in this generic service guide. In such cases, please contact your regional offices or the

responsible personnel/channel to provide you with further technical details.

2. Please note WHEN ORDERING FRU PARTS, that you should check the most up-

to-date information available on your regional web or channel. If, for whatever reason,

apart number change is made, it will not be noted in the printed Service Guide. For

ACER-AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFER

ENT part number code to those given in the FRU list of this printed Service Guide.

You MUST use the list provided by your regional Acer office to order FRU parts for

repair and service of customer machines.

Содержание PD-115



























































Результаты поиска

Содержание PD-115

Отзывы:

Похожие инструкции для PD-115

Бренды по названию

Популярные бренды

Acer PD-115, Руководство по обслуживанию

Результаты поиска

Содержание PD-115

Отзывы:

Похожие инструкции для PD-115

Бренды по названию

Популярные бренды