manualshive.com logo in svg

Acer HDS WMS100, Справочное руководство

Поделиться
Скачать
Acer HDS WMS100 Скачать руководство пользователя страница 66

44 Chapter 

4 

Subsystem 

Architecture and Components 

This chapter provides the information on the Fibre and NAS models. The following table 
illustrates the sections that provide the explanation for each model. According to the 
customer's model, please read the required section. 

„

 

Fibre Model: Connects disk array subsystem to a host computer with Fibre Channel 
interface. 

„

 

NAS Model: Connects NAS Unit connected to disk array subsystem to a host computer 
with LAN interface. 

 

Sections Fibre 

 

NAS 

4.1.1 WMS100 Rack-Mount Model 

{

 

{

 

4.1 

4.1.2 WMS100 Floor Model 

{

 

−

 

4.2 Redundant 

Power 

Supplies 

{

 

{

 

4.3 

Fibre Channel Interface 

{

 

−

 

4.4 Ethernet 

Interface 

−

 

{

 

4.5.1 WMS100 Rack-Mount Model 

{

 

{

 

4.5 

4.5.2 Floor Model 

{

 

−

 

4.6.1 Front Bezel Component Locations and Functions 

{

 

{

 

4.6.2 Component Locations 

{

 

{

 

4.6.3 Switch Locations and Functions 

{

 

{

 

4.6.4 Connector Locations and Functions 

{

 

{

 

4.6 

4.6.5 LED Locations and Functions 

{

 

{

 

{

: The explanation is provided. 

—: The explanation is not provided. 

4.1

 

Configuration Block Diagrams 

This section includes block diagrams for the following: 

„

 

WMS100 Rack-Mount model. 

„

 

WMS100 Floor Model. 

4.1.1

 

WMS100 Rack-Mount Model 

The configuration block diagrams of the Rack-Mount models are shown below. The 
RKXS/RKAJAT can mount up to 15 disk drives. (The RKXS has a controller that can controller 
that can control up to 105 disk drives as RAID.) The disk drives can be assigned to data 
disk(s), parity disk(s) (mirror disk(s)) depending on the RAID level. Up to 15 spare disks can 
be mounted in any location within the configuration. 

Содержание HDS WMS100









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды