manualshive.com logo in svg

Acer HDS WMS100, Справочное руководство

Поделиться
Скачать
Acer HDS WMS100 Скачать руководство пользователя страница 167

 
 

 

Acer | HDS WMS100™ User and Reference Guide 

145 

 

7.8

 

Setting Host Connection Parameters 

There are two methods for setting options: 

„

 

Simple Setting  

When using the simple setting, select the environmental elements of the host computer 
to be connected. When the selection is made, the host group options (host connection 
mode 1 and 2) necessary for the host computer to be connected are set automatically. 

„

 

Detailed Setting  

When using the detailed setting, directly set the necessary host group options (host 
connection mode 1 and 2) in the same way as the conventional one. 

The host connection parameters do not need to be set for the NAS system. 

7.8.1

 

Simple Setting 

Set the host group options (host connection mode 1 and 2) that are necessary for the host 
computer to be connected. To do this, select the environmental elements of the host, such 
as platform, alternative path, fail-over, and additional parameter. Some host environments 
require a detailed setting as well as the simple setting. For details, refer to Table B.2. 

1.

 

In the Unit window, click the Logical Status tab. 

2.

 

Double-click Host Groups. Double-click the Port that you want to set for the connection 
mode with the host to display 000:G000. 

3.

 

Display the Options and Logical Unit by double-clicking 000:G000, and select the 
Options: 

 

Содержание HDS WMS100









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды