Acer HDS WMS100 Скачать руководство пользователя страница 231

Страница: 231 / 328

Acer | HDS WMS100™ User and Reference Guide

209

8.4.5.3

Progress Messages

When the following Progress messages are displayed, follow the instructions to resolve the
problem.

Table 8.8

Progress Messages (continues on next page)

Message Code

Message Text

Recovery Measures

I031xy

Path recovered automatically

The path recovered automatically.

(x: Remote DF# (0), y: Path # (0 or 1))

I10000

Subsystem is ready

The unit is ready.

I11000

All raid group initialized

All RAID groups were deleted.

I111xx

RAID group deleted (RG-xx)

All LUs were deleted. (xx: RAID group# (0-14))

I12000

ALL LU initialized

All LUs were deleted. (This is also displayed when the LU#0 is

created.)

I12100

LU deleted (LU-xxx)

LUs were deleted. (xxx: LU# (0-511))

I12200

LU format completed (LU-xxx)

LU formatting was completed. (xxx: LU# (0-511))

I12400

LU format start (LU-xxx)

An LU formatting was started. (xxx: LU# (0-511))

I12500

Unified LUs separated (Uni: LU-xxx)

Dissolution of all LU unification (to dissolve unification of all

the unified LUs and to split them into internal LUs) was

executed.

(xxx: LU# (0 to 511) of a unified LU to be split)

I12600

Last LU separated from unified LU

(Uni: LU-xxx)

A separation of a final LU of a unified LU (to separate the last

one of the internal LUs which have been combined with a

unified LU) was executed.

(xxx: LU# (0 to 511) of a unified LU to be split)

I12700

LU reappeared (Uni: LU-xxx)

An internal LU(s) was validated again through splitting of all

unified LUs or a separation of a final LU.

(xxx: An LU# (0 to 511) of an internal LU which has been

separated and validated)

I15Axy

Dynamic sparing start

(Unit-x, HDU-y) [zzzzzzzzzz]

Dynamic sparing started.

(x: Unit ID# (0-14), y: Disk drive# (RKXS=0-13, RKAJ=0-14),

z: Detailed code)

I17002

Default LU-CTL change failed [PS

OFF]

Set the equipment in the ready state and turn off the power,

then turn on the power again

I17003 Default

LU-CTL

change failed [HOT]

Use the system as it is

I17004

Default LU-CTL change failed [LU]

Permanent LU

I1A00x

Permanent LU disable

(Default CTL-x)

Set the equipment in the ready state and turn off the power,

then turn on the power again.

I1A10x Permanent

deleted

(Default CTL-x)

LU residence is deleted. (When RAID group/LU is deleted)

(x: Default Controller# (0 or 1)

I1A30x

Permanent LU enable

(Default CTL-x)

The FlashAccess function was turned on.

(x: Default Controller# (0 or 1))

Содержание HDS WMS100









































































































































































































































































































































Результаты поиска

Содержание HDS WMS100

Отзывы:

Бренды по названию

Популярные бренды

Acer HDS WMS100, Справочное руководство

Результаты поиска

Содержание HDS WMS100

Отзывы:

Бренды по названию

Популярные бренды