background image

Safety Information |

5

Safety Information

Warnings

This symbol warns user that uninsulated voltage within the unit may have sufficient 
magnitude to cause electric shock. Therefore, it is dangerous to make any kind of 
contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and 
maintenance of this unit has been included. Therefore, it should be read carefully in 
order to avoid any problems.

WARNING

To prevent fire or shock hazards, do not expose this unit to rain or moisture. 

WARNING

Do not use this unit’s polarized plug with an extension cord receptacle or other outlets unless 
the prongs can be fully inserted.

WARNING

Refrain from opening the display cabinet as there are high voltage components inside. Refer 
servicing to qualified service personnel.

CAUTION

To reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To 
fully disengage the power to the unit, please disconnect the power cord from the ac outlet. Do 
not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified 
service personnel.

CAUTION

Please use the power cord provided with this monitor in accordance with the table below. If a 
power cord is not supplied with this equipment, please contact your supplier. For all other 
cases, please use a power cord that matches the AC voltage of the power outlet and has been 
approved by and complies with the safety standard of your particular country.

Содержание DV555K






































































































Отзывы: