Acer DV555K Скачать руководство пользователя страница 13

Страница: 13 / 101

Installation of Your Display |

Installation of Your Display

Moving Your Display

Prior to installation, place the display on a flat area or surface with adequate space.

Make sure there is nothing on the floor/surface that can damage the display.

To avoid damaging the screen face, place a protective sheet on the surface underneath the
display.

WARNING

• For proper installation it is strongly recommended to use a trained, authorized technician.

Failure to follow standard mounting procedures could result in damage to the equipment or
injury to the user or installer.

• Product warranty does not cover damage caused by improper installation, remodelling, or

natural disasters. Failure to follow these recommendations could result in voiding the
warranty.

• DO NOT mount the display yourself. For proper installation

it is strongly recommended to

use a trained, qualified technician

• This display is designed to operate at an altitude of up to 2,000m above sea level.

CAUTION

Never move or carry the display yourself.

NOTE

Do not leave the monitor in the face-up or face-down position for more than one hour as this
may result in a negative effect on the screen's performance.

Содержание DV555K






































































































Результаты поиска

Содержание DV555K

Отзывы:

Похожие инструкции для DV555K

Бренды по названию

Популярные бренды

Acer DV555K, Руководство пользователя

Результаты поиска

Содержание DV555K

Отзывы:

Похожие инструкции для DV555K

Бренды по названию

Популярные бренды