Acer AT310 F1 Series Скачать руководство пользователя страница 139

Страница: 139 / 176

121

Software Installation

Prerequisites on remote management PC

Before installing Java tool and UPnP tool, make sure your system have
the following configuration requirements:

•

Supported environments - Microsoft Windows Vista, XP, Windows
2000, 2003, 2008 Server.

•

JAVA Recommended Version 6 Update 12 (file size: ~ 7 MB)

Installing the Java Tool

Follow the instructions below to install Java in a Windows operating
system.

Go to http://www.java.com.

Click Downloads.

Click the See all Java downloads here link.

Click Windows XP/Vista/2000/2003/2008 Online.

Choose a folder location. (Save the file to a known location on
your computer.)

Click Save.

If you have previously downloaded this version of java, click Yes.

Verify the following:
(1) Name of the file is jre-6u12-windows-i586-p.exe or later

version.

(2) Size is approximately 7 MB.

Close all applications including the browser.

10 Double-click on the saved file icon to start the installation process.

Содержание AT310 F1 Series
















































































































































































Результаты поиска

Содержание AT310 F1 Series

Отзывы:

Acer AT310 F1 Series, Руководство пользователя, Страница: 139 / 176

Результаты поиска

Содержание AT310 F1 Series

Отзывы: