Acer Altos S205F Скачать руководство пользователя страница 8

Страница: 8 / 58

Acer S205F / S200F User’s Manual

viii

• The power connection should always be disconnected prior to removal of the Power Supply/

Cooling module from the enclosure.

• A safe electrical earth connection must be provided to the power cord. Check the grounding

of the enclosure before applying power.

• Provide a suitable power source with electrical overload protection to meet the requirements

laid down in the technical specification.

Warning

Do not remove covers from the PSU. Danger of electric shock inside. Return the PSU to your supplier
for repair.

PSU Safety Label: Electric Shock Hazard Inside

Caution

If this equipment is used in a manner not specified by the manufacturer, the protection provided

by the equipment may be impaired.

Fibre Channel Host & Expansion Connectors

Important

If fitted with Optical modules, the modules must be a UL (or other North American NRTL)
RECOGNISED COMPONENT and the laser in the module must comply with Laser Class 1, US 21 CFR
(J) and EN 60825-1.

If passive copper cables are connected, the cable must not have a connection to the supply pins,
pins 15 & 16.

Battery Safety

The battery is user replaceable, please refer to the Battery Replacement Procedure.

Warning

There is a danger of explosion if the battery is incorrectly replaced.

• Dispose of used batteries in accordance with the manufacturer’s instructions and National

regulations.

Rack System Precautions

The following safety requirements must be considered when the unit is mounted in a rack.

• The rack design should incorporate stabilizing features suitable to prevent the rack from

tipping or being pushed over during installation or in normal use.

• When loading a rack with the units, fill the rack from the bottom up and empty from the top

down.

• System must be operated with low pressure rear exhaust installation (Back pressure created by

rack doors and obstacles not to exceed 5 pascals [0.5mm Water gauge])

Содержание Altos S205F



























































Результаты поиска

Содержание Altos S205F

Отзывы:

Похожие инструкции для Altos S205F

Бренды по названию

Популярные бренды

Acer Altos S205F, Руководство пользователя

Результаты поиска

Содержание Altos S205F

Отзывы:

Похожие инструкции для Altos S205F

Бренды по названию

Популярные бренды