Acer Altos S205F, Руководство пользователя

Страница: 21 / 58

Introduction
9
Table 1–3 Altos S205F RAID I/O Module LEDs
LED Functions Color Description
Battery Fail Amber When ON this LED denotes the following status:
• Battery voltage is lower than 2.5V.
• Battery temperature is abnormal (normal 0° - 45°C on charge
state)
• BBU is not present
When FLASHING, the LED denotes BBU is under charging.
When OFF, the LED denotes BBU charge is done.
Expansion Port
Signal Good
Green When ON this LED denotes that running FC signal is good.
RJ45 Ethernet Con-
nection Green
Green
LED1: Static ON while LAN port status is link.
LED2: FLASHING while LAN port status is active.
System Amber When ON this LED denotes that the Controller is failed or SES Ser-
vices card is failed.
Cache Active Amber When ON this LED denotes the following status:
• When system is with power, ON denotes cache memory con-
tains data or ECC errors are detected.
• When system is without power, ON denotes cache memory
contains data and is held up by BBU.
Host Port 1
Signal Good
Green When ON this LED denotes that incoming FC signal is GOOD.
Host port 0
Signal Good
Green When ON this LED denotes that incoming FC signal is GOOD.
Table 1–4 Altos S200F JBOD I/O Module LEDs
LED Definition Color Normal
Status Fault Sta-
tus
FC Host Port 0
Signal Good Incoming FC signal is GOOD.
No connection or incorrect connection
Invalid SFP connection
Green On
Off
Flashing
FC Host Port 1
Signal Good Not used. Green On
Off
Flashing
Router Status Storage Router Device Ready
Storage Router Device not ready or defective Green On Off
Module Fault Fault present (also
On when booting)
Successful JBOD I/O module initialization
Amber Off On