Acer Altos S205F Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 58

background image

Preface

v

Preface

What is in this manual
This user’s manual gives you step-by-step instructions on how to install, configure and connect a
Altos S205F / S200F storage subsystem to your host computer system, and how to use and maintain
the system.

Who should use this manual
This user’s manual e assumes that you have a working knowledge of the Fibre Channel Arbitrated
Loop (FC-AL) and Advanced Technology Attachment (ATA) environments into which you are
installing the Altos S205F / S200F Storage System system. If you do not have these skills, or are not
confident with the instructions in this manual, do not proceed with the installation.

About this manual
This user’s manual provides the following information:

•

Chapter 1, ”Introduction”, on page 1

provides an overview of the Alto S205F / S200F storage

subsystem and describes of the modules which make up the subsystem.

•

Chapter 2, ”Getting Started”, on page 19

provides step-by-step instructions for installation

and initial set-up.

•

Chapter 3, ”Operation”, on page 39

tells you how to power on/off the Alto S205F / S200F,

monitor the LEDs and start the drives.

International Standards

The Alto S205F / S200F storage system complies with the requirements of the following agencies
and standards:

• CE
• UL 60950
• TUV/GS
• BSMI

Potential for Radio Frequency
Interference

USA Federal Communications Commission (FCC)

Note

This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.

«
...
3
4
5
6
7
...
»

Содержание Altos S205F



























































Отзывы:

Нет отзывов

Похожие инструкции для Altos S205F

Бренд: Quantum Страницы: 9

Бренд: Quantum Страницы: 2

Бренд: Quantum Страницы: 11

Бренд: Quantum Страницы: 7

Бренд: Quantum Страницы: 10

Бренд: Quantum Страницы: 8

Бренд: Tandberg Data Страницы: 58

ValueLoader DLT VS80

Бренд: Quantum Страницы: 50

grand Hard Disk

Бренд: LaCie Страницы: 2

Бренд: DANE-ELEC Страницы: 2

TotalStorage DS4200

Бренд: IBM Страницы: 222

VERTEX 2 SATA II 3.5

Бренд: OCZ Страницы: 3

Бренд: G&T SALES Страницы: 2

Бренд: Gardiun Страницы: 26

Бренд: Quantum Страницы: 3

Бренд: SANHO Страницы: 24

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды