Acer ALTOS R910 Series, Руководство пользователя

Страница: 89 / 210

79
Installing DIMMs
Caution! Use extreme care when installing a DIMM. Applying too
much pressure can damage the connector. DIMMs are keyed and
can be inserted in only one way.
Note: DIMM slots on the memory module must be installed only
in certain configurations. Numbers next to DIMM slots correspond
to installation sequence. DIMMs must be installed in pairs.
1 Observe the ESD precautions and pre-installation instructions
described on page 37.
2 Remove the memory board. For instructions, see “Hot-removal of a
memory board” on page 57 or “Cold-removal of a memory board”
on page 75, depending on your server configuration.
3 Remove the memory board DIMM cover from the memory board:
(1) Pull out the latch on the memory board DIMM cover (A) .
(2) Press the left and right DIMM cover tabs (B) .
(3) Press the retainer tab, on the lower right of the cover (C) .
(4) Lift the cover from the memory board (D) .
4 Locate the DIMM slots on the memory board.
5 Open the clips on the DIMM slot(s) (A) .
6 Align (B) then insert the DIMM into the socket (C) .