Acer AB460 F1, Руководство пользователя

Страница: 83 / 618

63
4 Default
Policy When IP A
CCESS
C
ONTROL
is enabled, you can select
either Accept or Drop from this pull-down menu to
either allow or deny access according to pre-defined
rules.
NOTE: If set to D
ROP
and you do not have a set of rules that will
accept the Internet connection, then an Internet connection
over the LAN is impossible. In this case, you need to change
your security settings via modem or by disabling the IP A
CCESS
C
ONTROL
.
5 Rule# Enter a rule number in the box for a command (or
commands) that will be used by the IP A
CCESS
C
ONTROL
.
6 IP/Mask Enter the IP address or an IP address range for which
the command(s) will be applied.
7 Policy This item instructs the IPMI what to do with the
matching packages.
NOTE: The sequence or the order of the rules is important;
rules are checked in ascending order until one matches. All
rules below the matching one will be ignored. The default
policy applies if no matching rules are found.
8 Append Select this option to add IP Address/Mask, rules or
commands to the existing ones.
9 Insert Select this option to insert IP Address/Mask, rules or
commands to the existing ones.
10 Replace Select this option to replace an old IP Address/Mask,
rule or command with a new one.
11 Delete Select this option to delete (a part of) an existing IP
Address/Mask, rule or command.
12 Max.
Number of
Failed
Logins
Enter the maximum number of failed attempts or
failed logins allowed for a user. If the number of failed
logins or attempts exceeds this maximum number
allowed, the user will be blocked from the system.
NOTE: If this box is left empty, the user is allowed to try to
login to the server indefinitely. For network security, this is not
recommended.
Item Name Description