Installation & Operation Manual - Model AV3000
Contents of this Manual are Subject to Change Without Notification
Page 3
SECTION 2 - SPECIFICATIONS
NOTES:
1. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at the user’s own expense. This Class
A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
2. This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, second edition, including
Amendment 1, or later version of the same standard incorporating the same level of testing requirements. Cet
appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
AIRFLOW ACCURACY:
+/- 5% of Reading
SPEED OF RESPONSE:
<1 second
SHUT OFF LEAKAGE:
@ Max Operating Pressure
Model AV3100: < 1.5% Transmitter Factory FS
Model AV3100-S: < 0.5% Transmitter Factory FS
Model AV3200: < 4% Transmitter Factory FS
OPERATING PRESSURE:
3” wc max. (differential pressure across valve)
ENVIRONMENTAL:
Temperature Air stream -20 to 140 deg. F
Ambient 25 to 125 deg. F
Humidity 0 to 95% RH non-condensing
TRANSMITTER ELECTRICAL:
Input Power 24 VAC +/- 20% 50/60 Hz, 2.5 VA Max. or
24 VDC +/- 20%, 75mA Max.
Power source must include a circuit breaker and be current limited
to 8 amps maximum and grounded on the (-) side.
Output Signal Configurable Using Jumpers JP1 and JP4:
DC Voltage Output: 0-10 v or 2-10 v
DC milliamp Output: 0-20 mA or 4-20 mA
Electromagnetic
Compatibility
EMC Directive 2004/108/EC
Low Voltage Directive 2004/108/EEC
EN61326-1:2006
FCC Part 15 (Note 1)
Product Safety IEC/EN/UL/CSA 61010-1:2001
CAN/CSA-C22.2 No. 61010-1 (Note 2)
ACTUATOR ELECTRICAL:
Reference Appendix
VALVE MATERIALS OF CONSTRUCTION:
Sheet Metal Parts Available in Galvanized Steel, 304SS, 316SS or Aluminum
Shafts All models use 316SS shafts
Airflow Sensors Polycarbonate Plastic, UL94-V0
OPERATING RANGE:
Valve
Model
Transmitter
Min. Flow
Maximum Design Airflow
(Valve 100% Open)
Transmitter
Factory FS
0.1”wc DP
0.2”wc DP
0.3”wc DP
0.45”wc DP
CFM
CMH
CFM
CMH
CFM
CMH
CFM
CMH
CFM
CMH
CFM
CMH
AV3100-06
30
51
143
242
206
349
254
432
315
535
330
561
AV3100-08
80
136
367
624
528
897
650
1104
800
1359
850
1444
AV3100-10
120
204
606
1029
860
1461
1056
1794
1300
2209
1370
2328
AV3100-12
180
306
840
1428
1192
2025
1461
2482
1790
3041
1900
3228
AV3100-14
250
425
1364
2317
1184
3200
2275
3865
2750
4672
3000
5097
AV3200-18
260
442
1437
2442
2086
3544
2596
4411
3200
5437
3400
5777
AV3200-24
350
595
1812
3079
2614
4441
3237
5500
4000
6796
4200
7136
AV3200-36
520
883
2875
4885
4172
7088
5191
8820
6400
10874
6800
11553
AV3200-48
700
1189
3625
6159
5228
8882
6473
10998
8000
13592
8400
14272
