SP8016-1005
ACCU-STEAM SERVICE MANUAL
PAGE 6
LAMPS
The lamps are a neon style lamp that is driven by 24vac.
Unplug the unit.
1.
Remove the three screws from the front door panel and drop the panel down.
2.
Remove the wires from the lamps.
3.
Depress the locking ears on the lamp with a pair of pliers and push thru the front of the panel
4.
Reinstall in reverse order.
5.
POWER
AT0E-1800-2
hEAT
AT0E-1800-1
ON / OFF SWITCh AND CONTACTS
This switch consists of 4 parts and each can be changed individually if any of the parts
failed.
Unplug the unit.
1.
Remove the three screws from the front door panel and drop the panel down.
2.
Remove the wires from the contacts and note their location.
3.
Push the spring loaded locking tab on the mounting ring and pull the switch out from the front
4.
of the panel.
Pry the contacts off of the locking ring.
5.
Reinstall in reverse order.
6.
SWITCH, SELECTOR
AT0E-3336-1
MOUNTING BLOCK
AT0E-3339-1
CONTACT, ON
AT0E-3338-1
2 REQUIRED
REMOVAL AND INSTALLATION