31
7.7 Selecting the custom measurement units
You can define up to three custom units per user. This allows you to perform calculations
directly from weighing detection (i.e. volume, paper grammage g/m3). The custom weight unit
can be recalled in all fields and menus where the units can be selected.
In the setup menu, select the "
Setup
" function and then the "
Custom units setup
".
On the
“
Custom units setup
”
screen, you can
select one of the three units K1, K2, K3 available
to personalize it.
After the selection, enter the following data:
▪
Name:
enter the unit identifier (max 15
characters).
▪
Symbol:
enter the symbol you want to assign
to the unit of measurement (max. 3
characters). The weight units g, kg, lb and so
on. are not allowed
▪
Multiplier factor:
enter the multiplicative
factor with which the weighing result has to be
calculated
▪
Decimal point position:
enter the position of
the decimal point with which you want to
display the result (i.e. entering 1, the value
123,123 will be displayed as follows: 12312,3)
