17
STANDARD OPERATIONS
Power reset
When power is applied, the
AccuProbe HH06
color meter will perform a series of Power
Reset Operations. When the unit is turned on, the instrument will flash the message
while it automatically performs a self check. This diagnostic operation tests the basic
operation of the sensor, electronic hardware, and the internal processor; and verifies the
user settings of the unit. As the power-up reset sequence proceeds, it will cause several
messages to be displayed for a few seconds each. These may include software version,
the name of the set of colors used for color picking, and the current temperature of the
unit.
If the unit is loaded with a PANTONE
3
Color System the display will read
for three seconds during the power up sequence. This diagnostic operation tests basic
operations. If everything is working properly, the message will appear:
signifying that the unit is ready for use. ### represents a number between 001 and 500.
The number indicates the position in the memory where the next measurement result will
be stored, i.e.:
This means that the instrument already has 15 measurements stored and that the next
measurement will be stored in position 16.
Each instrument is calibrated to operate over a specific temperature range. The normal
range is +65
o
F (18
o
C) to +85
o
F (29
o
C). This range may be set to other values for specific
applications or conditions. Consult your dealer for the range of a specific unit.
3
PANTONE
is a registered trademark of Pantone, Inc. Portions
©
Pantone, Inc.
Please wait
Parts Copyright
Pantone, Inc.
###_Rdy/Measure
016_Rdy/Measure
