AccuEnergy Acuvim II, Руководство пользователя

Страница: 88 / 280

80
values)
• AO/AI Value(the AO output values and the AI sample values)
The following procedures show how to select and store parameters in historical
log 1. The Group field determines the items that are available for selection.
1) Select a Group. The possible selections are: Real-Time Metering, Energy,
THD Volts AN/AB, THD Volts BN/BC , THD Volts CN/CA , THD IA , THD IB , THD IC,
Sequence Component, Phase Angles, DI Counter, AO/AI Raw Value and AO/AI
Value.
2) Select items for your log:
a. Highlight the parameter(s) you want to log into the meter's memory.
b. Click Add to add the parameter to the Selected Parameter Area.
c. To remove parameter(s), highlight them in the Selected Parameter Area and
click Remove.
3) Set the logging interval (in minutes). Interval can be set from 0 - 1444
minutes according to different application.
The logging interval determines when the meter takes a snapshot.When
interval is set as 0, the set of historical data log is disabled.
4) There are 63 sectors in total for the 3 historical data logs. User can assign
different sector size to each log according to different applications (as long as
the total sector sizes of the 3 logs do not exceed 63).
5) When Enable is selected for the logging timer, users can specify the start time
(to start data logging) and the end time (to stop data logging). The meter will
take snapshots of the selected parameters according to the logging interval
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com