AccuEnergy Acuvim II, Руководство пользователя

Страница: 58 / 280

50
Press E to move the cursor upwards, the cursor will move to the bottom when it
reaches the top.
Press V/A to select and modify the parameter.The figure shows the parameter
selection page. “SYS” stands for system parameter, “I/O” stands for expanded I/
O module parameter, “NET” stands for Ethernet module parameter and “ALM”
stands for alarm parameter. As shown in the figure, the cursor points to the “SYS”,
which means system parameter is selected.
c) System Parameter Setting
Users can select and modify system parameter in the system parameter setting
mode.
Key functions for selecting a parameter:
Press H to return to parameter selection mode.
The screen will roll to the next page each time P is pressed and will return to the
first page when P is pressed at the last page.
The screen will roll to the last page each time E is pressed and will return to the
last page when E is pressed at the first page.
Press V/A to modify the selected parameter.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com