AccuEnergy Acuvim II, Руководство пользователя

Страница: 149 / 280

141
10. Set HTTP port in the eighth setting page, such as 80. Press the "V/A" key
to go to the setting page. Users may set the parameters pointed out in Figure
5-36. The cursor starts at the first digit. After setting the HTTP port, press the "V/
A" key to accept. Press the "P" key to go to the ninth setting page for the reset
mode. The HTTP port's default value is 80, and the user defined range of port is
6000~9999. If the set port is not in the correct range, the set port will return to
the default value.
Fig 5-36
11. Set resetting mode in the ninth setting page. Select “RESET” to reset the
module. Selecting “NO” will not reset the module. Selecting "DEFAULT" will
load the module with default settings and reset module. Press the "V/A" key to
go to the setting page and the parameter pointed out in Figure 5-37 will flash.
Press the "P" or "E" key to select the configuration mode. Press the "V/A" key to
accept.
Note: When configuring Ethernet module settings completely, users must select
“RESET” to restart module and new settings will take effect.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com