12
Machine Operation
All Accu1 equipment is designed to give maximum service with minimum maintenance. The following table is a
suggested guide to help you maintain your machine properly. Correct equipment care, i.e.,
KEEPING THE
MAHCINE OUT OF THE WEATHER, AND KEEPING FOREIGN OBJECTS OUT OF THE HOPPER
, will be
rewarded with many years of top performance.
IN SHOP PART CHECK SCHEDULE
PART
CHECK PART FOR DAY WEEK MONTH
Air Intake Filter(s)
Clogged pores
Airlock Seals
Wear or Damage
Belts
Free of Grease
Tension
Chains*
Tension
Electrical
Connections for Material
Build-Up; Clean as
Needed
Contactors for Erosion or
Pitted Points
Motor Vents
Cleaned Out
NOTE: DO NOT LUBRICATE CHAIN
.
Chain is permanently lubricated at the factory. Lubricating chain
will cause it to wear faster because chain will collect dust and grit.
IN FIELD
Although all maintenance should be done on a regular basis at your shop rather than in the field, occasional
field adjustments may be required. The following list of tools will allow field personnel to perform any necessary
equipment adjustments.
TOOLS FOR USE IN FIELD
Screwdriver
Volt-Ohm Meter and Continuity Checker
Wrenches: 1/2”, 7/16”, 9/16”, 3/4”
5/32”, Allen, 1/8” Allen
8” Crescent
