4
Accu1 9118
Size: 20” x 24” x 36”(91.44cm x 50.8cm x 91.44cm)
Power requirement: (1) 110 volt – 15 amp circuit /(1) 220 volt - 10 amp circuit
Blowing Capabilities:
For use with Cellulose, Fiberglass, Rockwool or Fireproofing material. Results vary with material
manufacturer. Results vary with size, type and length of hose being used.
Machine Settings:
All settings are starting points only – machines should be set to job and weather conditions.
Open Blow: (Attic) with 100ft (30.48m) of 2 ½” (6.35 cm) blowing hose
Product gate: Remove completely
Sidewalls: With 50ft (15.24m) of 2 ½” (6.35 cm) blowing hose and 50’ (6.35 cm) of 2” (5.08cm)
hose:
Using 1” (2.54cm) reducing nozzle: Product gate open to 3
rd
hole
Using 2” (5.08cm) reducing nozzle: Product gate open to 7
th
hole
Finish Spray: Product gate: Open to 3
rd
hole.
Pump pressure: minimum of 200psi with nozzle shut off.
Spray Wall: Product gate: Open to 7
th
hole.
Pump pressure: minimum of 200psi with nozzle shut off.
Fireproofing patch: Product gate: Open to 4
th
hole.
Pump pressure: minimum of 150 psi with nozzle shut off.
