5-4
M
ODEL
10 O
PERATIONS AND
M
AINTENANCE
M
ANUAL
Accu-Sort Systems
1
No power indication
Possible Cause(s)
Solution
A - Type of power input
A - If using any interface box, verify (using the appropriate documentation that
describes proper voltage and current requirements) that power is supplied to the
interface box. If no interface box is being used, verify (using the appropriate
documentation that describes proper voltage and current requirements) that power
is supplied to the Model 10 and on the correct wires.
If the correct power is being supplied, and the Model 10 does not power up, return
the unit to Accu-Sort Systems, inc. for further repair.
2
Status LED blinks red
Possible Cause(s)
Solution
A - Laser / Motor failure
A -
1 - Connect the Model 10 to a PC running Accu-Setup (Small Scanner Setup).
2 - Establish a connection to the scanner (See Small Scanner Setup
Instructions.)
3 - Select Utilities - Terminal Mode. It may be necessary to use the standard
terminal interface, or if a button has already been defined, select Hwerr, or
(<ESC><^B>3003<^M><ESC>).
4 - The HARDWARE / SOFTWARE STATS should be displayed. Look for the
Laser/Motor failures. If either is greater than 0, call Accu-Sort Systems, inc. with
the noted problem and return the unit for further repair.
3
Status LED blinks yellow
Possible Cause(s)
Solution
A – Watchdog resets error
A -
1 - Connect the Model 10 to a PC running Accu-Setup (Small Scanner Setup).
2 - Establish a connection to the scanner (See Small Scanner Setup
Instructions.)
3 - Select Utilities - Terminal Mode. It may be necessary to use the standard
terminal interface, or if a button has already been defined, select Hwerr, or
(<ESC><^B>3003<^M><ESC>).
4 - The HARDWARE/SOFTWARE STATS should be displayed. Look for the
Watchdog resets. If greater than 0, call Accu-Sort Systems, inc. with the noted
problem and return the unit for further repair.
NOTE -
The Watchdog resets error is normally used to diagnose a software
problem. It will be necessary to give as much detail about how this error occurs,
such as scanning with excessive noise on the box, or any specific piece of nearby
equipment starting/stopping).
4
Status LED blinks repeated red-green-yellow sequence
Possible Cause(s)
Solution
A - Model 10 is in setup mode
A – Return the Model 10 to run mode by cycling power
-- or --
1 - Return the Model 10 to run mode by connecting the Model 10 to a PC
running Accu-Setup (Small Scanner Setup).
2 - Establish a connection to the scanner (See Small Scanner Setup
Instructions.)
3 - Select Exit Accu-Setup.
4 - If the scanner appears to go into the setup mode again, re-establish a
connection to the scanner. Select Modify Setup - Port Setup. Ensure the Always
allow setup mode box is not checked. This box allows the setup mode to be
entered by the <ESC><ESC><ESC> sequence.
Содержание 10
