Accorroni HUB RADIATOR MINI 11.0, Руководство по установке

Страница: 36 / 48

36
15. DIGITAL WEEKLY TIME PROGRAMMER KIT
INSTRUCTIONS
15.1 DESCRIPTION
The programmer is equipped inside with a rechargeable lithium
battery that allows it to keep time and programs for about 1
month, even without mains power supply.
During normal operation, the display shows the day of the week
and the current time, as well as the operating status in which the
presence of a light bulb symbol indicates that the appliance is on.
15.2 OPERATING INSTRUCTIONS
The functions of the keys, with reference to fig. 14, are the
following:
1) Time setting:
Press the clock symbol at the same time as the D + symbol to set
the day of the week. To set the time, press the clock button at the
same time as H +.
To set the minute, press clock at the same time as M +.
2) Gear / programming switch:
Press the “MANUAL” button to switch between the “ON” “AUTO”
and “OFF” position.
3) “P” key for selecting the on / off programs.
4) “H +” key for advancement and hour selection.
5) “M +” button for advancing and selecting minutes.
6) “D +” button for advancing and selecting days of the week.
7) Key
to change the time and day of the week and to return
to the current time when in “PROGRAMMING” mode.
15.3 INSTRUCTIONS FOR USE
SETTING THE CURRENT DAY AND TIME
To allow the programmer to function correctly, it is necessary to
set the current day and time by acting as follows:
a) to set the correct day, press simultaneously the clock symbol
and the D + symbol
b) to set the correct time, press the clock symbol and the H +
symbol
c) o set the correct minute press simultaneously the clock
symbol and the M + symbol
15.4 PROGRAMMING
16 programs are available, of which 16 are for switching on and
16 for switching off
ATTENTION! In all cases described below in which the
programmer gives consent to start,
the actual operation of the radiator is however also affected
by the adjustment of the room thermostat located on the
control panel of the radiator itself.
To facilitate programming, if identical operating times are to be
adopted for different days of the week, some combinations of
days are available for repeating the set program, according to
the following scheme:
- a different program for each day of the week (the day to be
programmed appears highlighted on the mo-tu-we-thecc
display.)
- the same program for the days from Monday to Friday
- the same program for the weekend on Saturdays and
Sunday
- the same program for the days from Monday to Saturday
- the same program for all days of the week
To program the radiator operating intervals, proceed as follows:
a) by pressing the P key, 1 on appears on the display;
b) by pressing key D + you can choose the day of activation;
c) to set the activation time, press the H + button;
d) to set the activation minute, press the M + key;
e) by pressing the P key again, 1 off appears on the display;
f) by pressing key D + you can choose the day of
deactivation;
g) to set the deactivation time, press the H + button
h) to set the deactivation minute, press the M + key
It is possible to set up to 16 daily switching on and off by
repeating the settings from point “a” to point “h”. If the keys
are not operated within 10 seconds, the display returns to the
main screen.
15.5 MANUAL OPERATION
Using simple commands it is possible, without modifying the
programming, to start the radiator when the program itself
foresees the off status or vice versa, proceeding as follows:
By pressing the manual button you can switch the setting off,
auto, and on (manual operation).
Fig.14