Accorroni HR 3.0, Руководство по установке

Страница: 47 / 53

47
TESTS CARRIED OUT
SYSTEM VACUUM
□
YES
□
NO EARTHING APARTMENT PLANT PRESENT
CHECK FOR LEAKS
□
YES
□
NO PRESSURE WITH NITROGEN
□
YES
□
NO
SINGLE UNIT TESTS
□
YES
□
NO ACCUMULATION FILLING CHECK
□
YES
□
NO
CORRECT WIRING
□
YES
□
NO CHECK REINFORCEMENT GROUP
□
YES
□
NO
MAINS VOLTAGE MEASUREMENT VOLT VALUE **
_______
**ATTENTION! below 215 V do not turn on the machine
MEASURE THE TEMPERATURE WITH ALL THE BOOSTERS IN OPERATION AND ANY
PHOTOVOLTAIC SYSTEM OFF
OPERATION IN BOOSTER HEAT PUMP 1
EVAPORATION TEMPERATURE O.U. °C (Pb3) ...............
_______
TECHNICAL WATER TEMPERATURE °C (Pb1) ...................
_______ NB
CONDENSATION START TEMPERTATURE °C* ....... _______ Wait for the technical water temperature
CONDENSATION START PRESSURE (Bar) ............
_______ reaches at least 50 °C before taking measurements
COMPRESSOR ABSORBED CURRENT (A) .............. _______
INSTALLER TECHNICAL ASSISTANCE CUSTOMER
SIGNATURE SIGNATURE SIGNATURE
_____________________________ _____________________________ _____________________________
A2B Accorroni E.G. s.r.l.
Via d’Ancona, 37 - 60027 Osimo (An) - Tel. 071.723991 - www.accorroni.it - a2b@accorroni.it