Accord XPC, Руководство по установке, Страница: 7 / 62

1
IE1-1230-B February 2001
Section 1: Wiring Regulations and
Safety Compliance
General Information
It is essential that this product is installed correctly, in particular with respect to a persons
safety and connection to the mains electricity supply. This product is not suitable for
installation, maintenance or connection by the user. A competent, qualified installer, with
for example BS5750 or NACOSS approval, must carry out installation and maintenance.
Compliance
The Accord xpC is compatible with the relevant parts of the following standards:
• BS 4737
• EN 60950
• CTR 21
• CE Standards (EN 50130-4)
• EN 41003
It is a condition of the product’s approval that the installation complies with the following:
Siting
The control panel enclosure must be sited indoors in a secure area where it cannot be
readily interfered with. There must be adequate ventilation, ample light and easy access
for servicing and maintenance. It is not suitable for siting externally or in harsh
environments where it could be subject to high humidity, extremes of temperature, chemical
atmospheres, high dust levels, or in a position where it may be subject to being dripped
on, or splashed by, water or other fluids.
The enclosure base must be securely fixed to a vertical, smooth, solid surface that is a
part of the fabric of the building. The position chosen must allow the cabinet door to be
removed and allow unhindered access for installation and maintenance.
Ventilation
While the control panel has been designed so that no part attains an unsafe temperature it
is important that adequate ventilation is provided around the cabinet, therefore the cabinet
should not be positioned close to heat-radiating equipment or other sources of heat.
Cabling
The panel has high voltage barriers between the a.c. mains supply and the alarm wiring
terminals. It is essential that these barriers are maintained in the way the cables enter the