Accord XPC, Руководство по установке, Страница: 53 / 62

47
IE1-1230-B February 2001
• Press: 9 3 5.
• Two beeps confirm that the Chime function has been assigned to these zones.
• Zones three and five now have the Chime option enabled.
Disabling the Chime Function on All Zones
To disable the Chime function on all zones, enter your User Code, select the Chime
option by pressing 9, then press the Ö key.
Note: The Chime function cannot be disabled on individual zones. However, the
chime function on a zone is deleted when entering and exiting programming
mode.
Viewing the Event Log from a System Keypad 0
To view the 16 Event Log:
• Enter a valid User Code and press 0.
• The most recently activated zone LED lights (No.) and the keypad beeps once
• The system works its way through the history of the zone activations.
• If a zone has been activated two or more times in succession the zone LED (No.)
will display and the keypad beeps for each activation.
• Hotkey conditions are indicated by all Zone LEDs (scrolling No.s) displaying.
• The keypad beeps twice in rapid succession at the end of the Log display.
The Ö key can be used to terminate event log veiwing at any time.
Viewing the Event Log from Ademco Microtech Downloader Software
The Ademco Microtech Downloader software allows the 250 Event Log of the Accord
xpC panel to be viewed. The log stores 250 time and date stamped events.
Viewing the Event Log through the keypad is restricted to the last 16 alarm events (with
no time/date stamp), only by using the Downloader software or a serial printer, can the
full 250 events and the time/date be viewed.
Printing the Event Log
The Event Log can be printed in full by a serial printer connected to the AUX
supply and loudspeaker terminal via a 4110 Printer Lead ( Part No. 2011-095 )
and adapter ( Part No. 2011-096 ). A Print option is provided in Group 9 — Option
7 Print Event Log.
Programming the Time and Date
The time and date may be set through the keypad by entering any valid code and pressing
# 0 (Log) then DDMMYYHHMM where DD is the day of the month (01 – 31), MM is
the month (01–12), YY is the year (00 – 99), HH is the hour (00 – 23) and MM is the
minute (00 – 59). Confirmation beeps acknowledge that a valid date and time have been
entered. The time and date can also be set using the Ademco Microtech Downloader