Accord XPC, Руководство по установке, Страница: 49 / 62

43
IE1-1230-B February 2001
Section 4: Operating The Accord
Setting and Unsetting the System
Before setting the system:
• Ensure all doors and windows are secure.
• Ensure movement detectors are not obstructed.
Full Set 1 ( )
To Full Set the system:
• Enter your User Code then press the 1 (Full Set) key.
• A constant exit tone is heard which changes to a broken tone as you pass the
detectors (except Final Exit zones) on the exit route.
• The Day LED (  ) will flash during the Exit Time.
• To cancel the setting procedure press the Ö key.
• When the system sets, two confirmation beeps are emitted by the keypad and
internal speaker. The Ö key will no longer function.
Easy Set allows users to Set the system without entering a User Code. If Easy Set is
programmed you may set the system by pressing the # key, then the 1 (Full Set) key. See
SECTION 3: Programming the Accord; Group 4 — Option 8 Easy Set.
Part Set 2 ( )
To Part Set the system:
• Enter your User Code then press the 2 (Part Set) key.
• This starts the setting of the system using the Part Set zone programming. This
allows a sub-set of the system to be set.
• A constant exit tone is heard which changes to a broken tone as you pass the
detectors on the exit route.
• The Day LED (  ) will flash during the Exit Time.
• To cancel the setting procedure press the Ö key.
• When the system sets two confirmation beeps are emitted by the keypad and
internal speaker; after this the Ö key does not function.
Note: The activation of the keypad buzzer and internal speaker are dependant on the
programming of Group 4 — Option 4 Part Set Exit Warning.
Easy Set allows users to Part Set the system without entering a User Code. If Easy Set is