![background image](http://html1.mh-extra.com/html/accom/wsd-hde/wsd-hde_installation-procedure_3694442008.webp)
WSD/HDe
Digital Audio Option Installation
12. Connect the internal SCSI ribbon cable (already inside the chassis) to the new SCSI RAID controller board.
A. On the internal RIGHT side wall of the WSD/HDe chassis, there is a SCSI ribbon cable clipped to the side of the chassis. Unclip
this cable, as shown in the LEFT photo below.
B. Connect the SCSI connector on the end of this ribbon cable to the SCSI connector on the top edge of the new SCSI RAID
controller board, as shown in the RIGHT photo below. Press down firmly on the connector to make a secure connection.
13. Remove the front panel from the WSD/HDe chassis.
A. Remove the front panel from the WSD/HDe chassis, by pulling firmly on the panel.
Continued on next page…
Page 8 of 15
©
2004 / Accom, Incorporated
Document Revised: 5-Nov-04 @ 8:09 AM