WSD/HDe
Digital Audio Option Installation
14. Remove the two disk drive sleds in the FAR RIGHT end of the disk array.
A. Loosen the thumbscrew on the two far right disk drive sleds, as shown in the LEFT photo below.
B. Remove the two disk drive sleds from the chassis, as shown in the RIGHT photo below.
15. Install the two new disk drives into the drive sleds.
A. Install the two new disk drives (Part #: 1600-0148 for 18GB / -0149 for 36GB / -0146 for 73GB) into the empty disk sleds, with the
orientation shown below. The “connector end” of the disk drive is oriented away from the hinged front cover of the sled, and will
hang over the edge of the disk sled as shown in the RIGHT photo below.
B. Use (6) of the Philips-head screws (Part # 1901-6328) to secure each disk drive into the disk sled. There are (3) screws on each
side panel of the disk sled.
The “connector end” of the disk drive hangs over
the edge of the disk sled.
Continued on next page…
Document Revised: 5-Nov-04 @ 8:09 AM
©
2004 / Accom, Incorporated
Page 9 of 15
