Acclaim Lighting Dyna Drum SO, Руководство пользователя

Страница: 12 / 22

10
Main menu items (Dyna Drum SO color changing models)
Allows you to set the DMX start address for this fixture. This fixture uses four
DMX channels (for Red, Green, Blue and White), beginning with the one
chosen here. See page 14.
Displays the current firmware version for the fixture. No changes are possible
within this entry.
Displays the ‘Fixture Hours’ or total operating time (in hours) since the fixture
was manufactured. No changes are possible within this entry.
Displays the current internal temperature of the fixture (in degrees
Centigrade). No changes are possible within this entry.
Determines whether the menu display should remain on when the fixture is
in standby mode.
Performs an auto test so you can check that all emitters are operating
correctly.
Inverts the menu display so that it reads correctly when the fixture is inverted.
See page 15.
Enables the keylock feature to restrict access to the menu. Note: Be sure to set
the lock number within the
PASS
entry before changing this option to
on
.
See
page 14.
Allows you to set a password number between
0
and
9999
for use when the
Loc
feature is enabled. See page 14.
Allows you to bias the red, green and/or blue intensities in order to achieve
a particular white balance that will be reproduced when RGB mixes are
requested - either via internal or external control. See page 15.
Determines fixture solo behavior for when there is no external control input.
Options are:
IntL
- displays static colors or chases.
bLnd
- blacks out the emitters
if control is lost.
LaSt
- retains last state if control is lost. See page 12.
Allows you to create a color chase that will be displayed when the
SoLo
item
is set to
IntL
. First set the chase
S
peed (0 to 240) and then set the
F
ade time
(0 to 240). The resulting out will be shown once the menu exits. See page 12.
Allows you to choose from a pre-mixed static color palette (
CL1
to
CL32
) or
mix your own color using the
Manu
(manual) option. See page 13.
Determines the wireless channel that should be used when the optional
wireless control system is fitted. Reserved for future use.