Acclaim Lighting Dyna Drum SO, Руководство пользователя

Страница: 11 / 22

9
Operation
Operation of the fixture will commence as soon as
power is applied and the user display on the rear
panel will first show
(Acclaim) and then either
show or a DMX address number (if a valid
DMX input is present). The fixture may or may not
immediately show output from its emitters - this will
depend upon the settings within the menu and/or
control input.
Note: The sealed control buttons use capacitive sensors
similar to your smartphone screen and will not respond
to touch if you are wearing gloves.
Entering the menu
Press and hold the
MENU
button for roughly 8 seconds until the entry flashes. You can
now access the menu.
If the keylock feature has been enabled (see page 14), ‘
0
’ will flash on the display. Enter the
password (between 1 and 9999) using the and buttons and press the ENTER button.
Note: The menu will automatically exit one minute after the last button press. While the menu
remains active, all emitter output will be suppressed.
Menu navigation
Once you have entered the menu you can use the four control buttons to navigate around
the menu and alter settings as necessary. The next two pages list the main menu items.
8 second
press to
initially
enter the
menu
Use the arrow
buttons to move
between main
menu items
Use the arrow
buttons to
increase or
decrease a
setting
Press
ENTER
to
save a setting
(or press
MENU
to exit without
saving)
The menu will automatically exit one minute after the last button press (all emitter output
will be suppressed while the menu remains active). You can exit from the menu immediately
by pressing and holding the
MENU button until output is restored.
User
display
Control
buttons