background image

14

Setting the DMX address

When external control is used, the DMX start address of the fixture needs to match the start 
address being used by the controlling device. Color fixtures use four DMX channels (for Red, 
Green, Blue and White), beginning with the one chosen here; white-only models use just 
one DMX channel.

To set the DMX address

1  Enter the user menu (see page 9).
2  Press 

ENTER

 to choose the 

Addr

 item.

3  Use the   and   buttons to choose a start address from 1 to 512.
 

Note: Do not set a DMX address higher than 509 for color models.

 

4  Press 

ENTER

 to save. The DMX start address is now fixed. 

Note: When a valid DMX input is attached to the Dyna Drum SO fixture it will override any internal 
color/chase settings; additionally, the user display will show the configured DMX address.

Setting the keylock

The keylock can help to deter unauthorized access to the menu by requiring a passcode 
number to be entered. Two menu items are used to configure the keylock: 

Loc

 and 

PASS

Note: Be sure to set the 

PASS

 option before enabling the 

Loc

 so that you know the code.

 

To set the keylock

1  Enter the user menu (see page 9).
2  Select the 

PASS

 menu item.

3  Use the   and   buttons to choose a passcode number between 0 and 9999.
4  Press 

ENTER

 to save.

5  Select the 

Loc

 menu item.

6  Use the   or   button to choose the 

on

 option.

7  Press 

ENTER

 to save. The keylock is now active. 

Note: To deactivate the keylock feature, enter the 

Loc

 menu item and choose the 

oFF

 option.

 

To enter the menu when keylock is enabled

 

1   When you enter the user menu and keylock is enabled, the display will show 

0

.

2  Use the   and   buttons to display the previously set passcode number.
3  Press 

ENTER

. If the entered passcode is correct, the menu will show 

Addr

; if not, it will 

return to show 

0

 so that you can try again.

To gain backdoor access if the passcode is unknown

The backdoor passcode is 

123

. If your passcode is unknown or forgotten, use the method 

above but enter 

123

 and press 

ENTER

 to gain access.

Содержание Dyna Drum SO























Отзывы: