Acclaim Lighting aria Dyna Accent, Руководство пользователя

Страница: 28 / 42

26
www.acclaimlighting.com
USING THE AUTOMATION FEATURES (PHOTOCELL)
The fixture includes two related features which allow you to automate standalone operation:
•
The in-built photocell can enable fixture output (at 100%) when the ambient light level
falls below a pre-determined level.
•
The auto shutoff timer determines how long the fixture should remain outputting after it
has been triggered by the photocell.
These automated features operate only in standalone mode, i.e. with no external wired or
wireless DMX control input.
Note: The automation features can also be configured via RDM, see page 31.
TO CONFIGURE THE AUTOMATION FEATURES
1 Enter the user menu (see page 19).
2 Use the or buttons to locate the
Photocell
option and press ENTER . The display will
show
Photocell On/Off
.
3 Press
ENTER
. If the display shows
Off
, use the or buttons to change the entry to
On
and press ENTER .
4 Use the or buttons to show
Photocell Timer
and press ENTER . The display will
show the number of hours that the fixture is currently configured to show output, once
triggered by the photocell.
5 Use the or buttons to show the required number of hours (from 1 to 24) and press
ENTER .
6 Use the or buttons to show
Photocell Sensitivity
and press
ENTER
. The display
will show the ambient light level at which the fixture should begin outputting (
100
is
the most sensitive to light). Some experimentation will be required to determine the
optimum setting (the default is 70).
7 Use the or buttons to show the required sensitivity setting (from 0 to 100) and press
ENTER .
Note: For the photocell feature to operate, ensure that no DMX signal is received by the fixture.
Color models will output all colors at 100% when triggered.