Acclaim Lighting aria Dyna Accent, Руководство пользователя

Страница: 11 / 42

9
www.acclaimlighting.com
FITTING A GROUND SPIKE
The optional ground spike kit provides extra flexibility for landscape illumination projects.
Note: This procedure can be carried out in any order, however, if you attach the fixture to the
spike once it is in the ground, the actions of attachment could loosen the spike’s grounding,
particularly in soft soil. Conversely, in hard soils it may be necessary
to first drive the spike into the ground using a mallet and a suitable
piece of wood as a drift (to protect the top of the spike).
1 Screw the threaded Joiner into the base of the fixture’s pillar and
tighten using a 15/16” (24mm) wrench:
2 Screw the small thread of the joiner
into the top of the ground spike and
use the same wrench to tighten it
in place.
3 Push the spike into the ground. If
necessary, use a piece of wood, each
side of the joiner, to apply suitable
downward pressure directly to the
top surface of the spike. Do not
push down hard on the fixture itself.
Threaded
joiner
Ground spike