background image

5 / 58

KOMPLET 211062

Reference:  MI211062            

           komplet 211062 

 

Version: 00

5 / 58

www.accesus.es

3- General:

  

This operating instructions manual is destined to the workers of the described machine. This op-

erating instructions manual must be accessible to workers every time. Request more copies if it’s neces-

sary.

 

ACCESUS Plataformas Suspendidas S.L. saves the rights to modify the product described in this

manual as a part of his continued improvement.

 

The clients can obtain more information about other ACCESUS products, demanding the docu-

mentation through address described at section 1 of this instructions manual. 

Please, check our website: www.accesus.es.

 

3.1-Glosary and abbreviations used in this manual:

W.L.L.  

Working Load Limit.

Electrician

  A professional worker who knows and has the correspondent and necessary qualification

 

 

to know the risks and to avoid the danger that has an electrical environment.

Worker 

A person who works professionally with the machine.

TSP

   

Temporary Suspended Platform.

Exploiter

 

The responsible for both the regulatory operation of the installation of the device and 

 

 

compliance with maintenance intervals and repair works.

Содержание KOMPLET 211062



























































Отзывы:

Похожие инструкции для KOMPLET 211062