Accesus KOMPLET 211062, Инструкция по эксплуатации

Страница: 28 / 58

28 / 58
KOMPLET 211062
Reference: MI211062 komplet 211062 Version: 00
28 / 58
www.accesus.es
7.3-Fall arrest device system securchite600
When the platform is running the secondary wire rope pass freely into the gags.
If the safety wire rope is blocked it might be due to the following reasons:
a) break of the work wire rope,
b) elevator breakdown,
c) any problem with the hoist that causes an increase of the velocity,
d) a crash,
e) overtilting of the platform,
f) STOP EMERGENCY button is blocked,
g) gags not reset.
For a) and b) cases it’s necessary to do a particular emergency operation.
For c), d), e), f) and g) cases the worker must tense the suspension wire rope using the e.lift501
hoist. After that go up some centimeters, unblock the STOP EMERGENCY button and push the RESET
handle of the securichute600 fall arrest device until his open position.
If the powered hoist glides, the worker can stop the platform pushing the STOP EMERGENCY but-
ton of the securichute600 fall arrest device.
EMERGENCY
STOP button
RESET lever
CLOSED
RESET lever
OPEN
E.lift501
+ Securichute600