35 / 58
Reference: MI211062
komplet 211062
Version: 00
35 / 58
The powered hoists are equipped with a manual descent system in case
of no power supply:
a) Stop the power supply disconnecting the socket.
b) Raise the emergency down lever located at the rear side of the hoist in
order to open the brake service. The platform descends by his dead weight and
his velocity is limited and controlled automatically.
c) If the platform don’t descend, an initial impulse must be given turning
clockwise the maneuver’s flywheel (1) situated in the axis of the engine after the
extraction of the plastic cap (2).
d) The platform stops when the brake’s handle is released.
e) When the platform is on the ground, remove the flywheel and place it
into the slot. Place the plastic cap over the engine.
In case of overload it is forbidden the no power emergency de-
scent.
It’s forbidden to descend the platform using the e.lift501 hoist brake when the electric de-
scent is possible
8.5-No power emergency descent
