Accent 800 Скачать руководство пользователя страница 37

Accent 800 User’s Guide: NuVoice 

 

37 

Appendix A: Compliance Information 

Federal Communications Commission (FCC) Warning 

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference that may cause undesired operation.

 

Changes or modifications to this product which are not authorized by PRC-Saltillo could exceed FCC limits and negate your authority to use this 

product. 

Note:

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help.

 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and 

operated with a minimum distance of 20cm (7.9 in.) between the radiator and your body. 
Operations in the 5.15-5.25GHz band are restricted to indoor use only. 
Contains FCC ID:SSSBC127-X 

Contains FCC ID:QOQ11 

Industry Canada (IC) Warning 

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device 

may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the 

device.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée 

aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  
This equipment complies with RSS radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and 

operated with a minimum distance of 20cm between the radiator and your body. 
Ce matériel est complété par une exposition de rayonnements RSS pour un environnement naturel. Ce matériel doit être installé et se faire 

avec une distance minimale de 20cm entre les radiateurs et votre corps. 
Operations in the 5.15-5.25GHz band are restricted to indoor use only. 
Les opérations dans la bande 5.15-5.25GHz sont limitées à une utilisation en intérieur. 
Contains IC:11012A-BC127 

Contains IC:5123A-11 

Wireless Communications Equipment 

Wireless communications equipment such as wireless home network devices, mobile phones, cordless telephones and their base stations, and 

walkie-talkies can affect this device and should be kept a least six (6) inches away from the device. 

Limitation of Intended Use, Third Parties, and Data Loss 

 

PRC-Saltillo does not warrant any functionality of this speech generating device outside the terms of its express warranty relating to the 

intended use of speech generation. PRC-Saltillo does not warrant any third-party software, nor is it responsible for any injury, damage or 

claims arising from the function or malfunction of any third-party technology, websites, products, and software. Additional uses may 

require further clinical determinations beyond the scope of an evaluation for speech generation devices. 

 

PRC-Saltillo assumes no responsibility for any loss or claims by third parties which may arise through the use of this product. 

 

PRC-Saltillo assumes no responsibility for any damage or loss caused by the deletion of data as a result of malfunction repairs or 

battery replacement. Be sure to back up all important data on other media (computer) to protect against its loss. 

Device Intended Purpose 

The Accent 800 is a speech generating device that augments communication for an individual with speech/language impairment. This device 

and its language programs give the user the ability to initiate conversation, seek information, state opinions, and share feelings. It can be hand-

held, used with a table stand, or mounted to a wheelchair. It is accessed by using the touchscreen, an available head tracking system, or a 

variety of available switch accessories. The device does not incorporate in any way medicinal substances, human blood or plasma derivatives, 

nor is it manufactured using tissues of animal origin. 

Expected Service Life 

The expected service life of the device is five years. If you dispose of your device, please dispose of it in accordance with your local, state, and/or 

country electronic recycling laws. 

Содержание 800









































Отзывы: