Accent 800 User’s Guide: NuVoice
27
Attaching a QRM Mounting Plate
Your device can be mounted on a table stand or a wheelchair mount. If you purchased the QRM mounting
plate with your device, the plate is already mounted on the back of your device. If you purchased the QRM
mounting plate separately, or if you need to replace it, follow these instructions.
Important!
The mounting plate’s screws are held in place on the plate with retaining washers.
Do not
remove the washers
.
To attach the QRM mounting plate to the device:
1.
Place the device face-down on a flat surface. Be careful not to scratch the display.
2.
Using a Phillips screwdriver, remove the three screws that are already in the mounting holes.
3.
Align the screws that are in the mounting plate with the threaded holes on the back of the device.
4.
Tighten the screws.
To remove the QRM mounting plate from the device:
1.
Loosen the screws just enough that you can pull the plate off the back of the device.
2.
Leave the screws held in place by the washers.
3.
Store the plate (with the screws held in place) in a safe location in case you need to mount it later.