Accent 800 User’s Guide: NuVoice
15
Removing or Reattaching the Handle
To remove the handle from the device:
1.
Using a Phillips screwdriver, remove the two screws that hold the handle in place.
2.
Pull the handle away from the device.
3.
If you are not going to mount a NuPoint module, it is important to attach the port cover to protect
the mini USB connector. See “Attaching the Top Port Cover”.
To reattach the handle:
Remove the port cover or NuPoint module, line up the holes in the handle with the holes on the back of
the device, and insert the two screws.
Attaching the Top Port Cover
If you removed the handle and are not going to mount a NuPoint module, it is important to attach the
port cover to protect the Mini USB Connector on the top of the device.
1.
Line up the holes in the cover with the holes on the back of the device.
2.
Insert and tighten the two screws that previously secured the handle.
To remove the port cover:
Remove the two screws that hold the port cover in place. Use the screws to mount a NuPoint module or
to reattach the handle.
Note:
Store the port cover where you can find it if you need to use it again.
Screw
Screw