Accent 800 User’s Guide: NuVoice
22
Attaching, Raising, and Removing a Keyguard
Your device came with a frame mounted on it. The keyguard attaches to the frame. If you removed the
frame, first reattach it, referring to “Removing or Replacing the Device Frame” on page 19.
Attaching the Keyguard
1.
Hold the keyguard over the screen, with the pins toward the top of the screen and the tabs toward
the bottom.
Important!
Position the keyguard so that the tabs are on the bottom. The tabs must be able to lie
flat against the screen, allowing the keyguard to snap into place.
2.
Insert one of the keyguard pins into the
opening near the top of the device frame.
3.
While holding the pin in place, lift upward
with your fingers to bend the middle of the
keyguard upward slightly. Then insert the
other pin into the opening on the other side
of the device frame.
4.
Press down on the bottom portion of the keyguard to snap the tabs into place.
Note:
If the keyguard tabs at the bottom do not snap into place, make sure that the keyguard is not
upside-down. (See step 1.)