35
3-6. Unloading the helicopter from the T1H2 tug
Step 2: When you are ready to unload the helicopter just move the “Engage/Lock”
switch from the “Lock” position to the “Engage” position on the remote.
Step 3: Slowly move the tug backward and visually check that the rollers on both
sides are engaged and rolling. If they are not rolling then stop and slowly move
forward and backward a few times until they are engaged.
Step 4: When the rollers are engaged then just slowly back the tug out from under
the skids.
Step 1: Put the optional air bag under the tail or position a person at the tail to en-
sure it doesn’t drop too low and hit the ground.
Air Bag
